Table of Contents
Advertisement
Chapter 6. Setting Up Communications
6.1 Setting Up moisture.IQ Communications
Comms
The
section of the Configuration Menu is used to set up all communications for the moisture.IQ (see Figure 79
on page 110). It includes the following options:
•
Serial Port (see "Configuring the Serial Port" below)
•
Modbus (see "Configuring the Modbus Connection" on page 74)
•
TCP/IP (see "Connecting to an Ethernet LAN" on page 75)
•
VNC (see "Configuring a VNC Connection" on page 80)
•
Web Server (see "Configuring the Web Server" on page 81)
•
User Management (see "User Management Operations" on page 82)
6.2 Configuring the Serial Port
IMPORTANT:
For proper communications, the serial port settings for the moisture.IQ must be the same as those for the
device connected to the moisture.IQ serial port.
To configure the moisture.IQ serial port, complete the following steps:
1. From the Configuration Menu screen (see Figure 52 on page 57), tap the
Port Setup screen similar to Figure 67 below.
moisture.IQ User's Guide
Figure 67: Serial Port Setup Screen
Chapter 6. Setting Up Communications
Serial Port
button to open a Serial
73
Advertisement
Table of Contents
