Table of Contents
Advertisement
GE
Measurement & Control
Certification & Safety Statements for the moisture.IQ Hygrometer
Installation
When installing this apparatus, the following requirements must be met:
• The temperature rating of the field wiring must be 70°C or greater.
• XP version unused entries should be closed with suitably certified blanking elements.
• The installation should comply with controlled drawing 752-364 rack/bench/panel version (see Figure 1 below) and
drawing 752-513 stainless steel weather-proof, fiberglass weather-proof and explosion-proof version (see Figure 2 on
page 2 through Figure 6 on page 4).
• The installation should comply with configuration drawings 712-1889 rack (see Figure 8 on page 5)/bench (see
Figure 7 on page 4)/panel (see Figure 9 on page 5) version.
• The installation should comply with installation drawings 712-2126 stainless steel weather-proof version (see
Figure 10 on page 6) and 712-2127 explosion-proof version (see Figure 11 on page 6).
Figure 1: Rack/Bench/Panel - Installation Control Drawing (Dwg. 752-364_revC, SH 1 of 1)
1100 Technology Park Drive, Billerica, MA 01821, U.S.A.
Telephone: 978-437-1000 or 800-833-9438
Sensing House, Shannon Free Zone East, Shannon, County Clare, Ireland
Telephone: +353 61 470200
Certification &
Safety Statements
CSS-0011, Rev. C
September 2015
Advertisement
Table of Contents
