Table of Contents
Advertisement
Chapter 3. Using the Settings Menu
3.10 Service Menu Options
This menu includes the three options described below.
3.10.1 Software Update
When an external USB drive containing a moisture.IQ software update file is connected, the
will be enabled. Proceed as follows:
Software Update
1. Tap the
Yes
2. Tap
at a screen similar to Figure 42 below to confirm your choice, or tap
3. The new software will be installed automatically and you will be prompted to tap a
the process.
Note: Your system configuration settings will not be affected by the software update.
3.10.2 Restart
To restart (i.e., reboot) the moisture.IQ system, tap the
screen similar to the one shown in Figure 30 on page 34.
3.10.3 Shut Down
To shut down the moisture.IQ system, tap the
similar to the one shown in Figure 31 on page 35.
46
button.
Figure 42: Software Update Confirmation Screen
Restart
Shut Down
button. Then, tap either
button. Then, tap either
Software Update
Cancel
to abort the update.
Restart
button to complete
Yes
No
or
at a confirmation
Yes
No
or
at a confirmation screen
moisture.IQ User's Guide
button
Advertisement
Table of Contents
