Table of Contents
Advertisement
Chapter 5. Using the Configuration Menu
5.4.1 Entering User Functions (cont.)
User Function
3. Tap the
text box just below the
below, to enter the function equation. When the equation is complete, tap the
Function Setup screen.
The buttons in Figure 61 above permit the inclusion of standard mathematical functions, lookup data from predefined
user tables (see "Entering User-Defined Tables" on page 69). The
equation definition. Also, you may tap the
top right corner of the screen may be used to duplicate information from one user function to another to avoid entering
the same information multiple times.
Note: To assist in entering the user function, the current definition is shown at the bottom center of the User Function
Setup screen as the following selections are made.
Function Label
4. Tap the
desired label.
Unit
5. Tap the
text box to open the Edit Unit Label screen and use the keyboard to enter the desired units.
Decimals
6. Tap the
Max
7. Tap the
and
8. After the functions has been defined, tap the
68
button to select the function name (
Channel
button to open the Channel x:User Function y screen, as shown in Figure 61
Figure 61: User Function Equation Screen
Clear All
text box to open the Edit Function Label screen and use the keyboard to enter the
text box and enter the desired number of decimal places for the function (
Min
text boxes to enter the
Func 1
Func 2
,
Check Math
button at any time to start over. The
Valid Range
for the function in digits from the keypad.
Return
button to return to the Configuration Menu.
Func 3
Func 4
,
or
). Then, tap the large
Check
button to return to the User
button is used to find any errors in the
Copy
Paste
and
1
6
-
moisture.IQ User's Guide
buttons at the
).
Advertisement
Table of Contents
