Fault Alarm Setup - GE moisture.IQ User Manual

Chapter 3. Using the Settings Menu

3.8 Fault Alarm Setup

The Fault Alarm Setup menu (see Figure 40 below) allows you to specify how the moisture.IQ dedicated fault alarm
relay responds to a fault condition and it lists the source of any current fault conditions.
•
In Case of Fault
Tap the
determines whether the relay is
detected. The source of a fault is displayed in the fault list in Figure 40 above.
Note: The fault alarm relay is tripped whenever any sensor is open, shorted or disconnected. It will also trip when an
overheating condition is detected.
•
After completing your selection, either tap the
discard the changes and keep the original settings. In either case, you will be returned to the Settings Menu.
44
Figure 40: The Fault Alarm Setup Screen
button to toggle between the
Energized DeEnergized
or
Enter
Energized DeEnergized
and
(fail-safe operation) when a fault condition is
button to save your changes, or tap the
options. This selection
Cancel
button to
moisture.IQ User's Guide