Table of Contents
Advertisement
6.4.2b
The Operator Account
Operator
The
account is provided to for day-to-day management of the moisture.IQ. By default, the
the same privileges as the
•
Enable/Disable DHCP
•
Specify a static IP, subnet, and gateway IP address
•
Modify some of the serial protocol settings
•
View the serial port connection status
•
View the TCP/IP connection status
•
View the Ethernet option firmware version, serial port and network diagnostics.
The default login credentials for the
•
User name: Operator
•
Password: password
Operator
The
password should be changed at the earliest opportunity. The steps for changing the
are the same as for changing the
User Management screen (see Figure 71 on page 78), then enter and confirm the new password.
Record the new operator password immediately, and keep it in a safe and secure location.
Note:
If the operator password is lost, it can always be reset using the
moisture.IQ User's Guide
Admin
, but cannot create or modify other accounts. The
Operator
account are:
Admin
password (see previous section). Select the
Chapter 6. Setting Up Communications
Operator
account allows the user to:
Operator
account from the Web
Admin
account.
Operator
has all
Operator
password
79
Advertisement
Table of Contents
