Table of Contents
Advertisement
C.2 Updating the moisture.IQ Module Firmware
1. Load the updated firmware into the
2. Plug the USB flash drive (with the software update) into the moisture.IQ (see Figure 91 for Rack/Bench/Panel
Mount, Figure 92 for Weatherproof/Explosion-Proof.).
moisture.IQ User's Guide
UPDATE
Figure 91: USB Flash Drive Plugged into Rear of Chassis
Figure 92: USB Flash Drive Plugged into Chassis Inside the Door
folder on the USB flash drive.
Appendix C. Updating the moisture.IQ Firmware
119
Advertisement
Table of Contents
