Table of Contents
Advertisement
Chapter 5. Using the Configuration Menu
5.3 Tagging the Inputs
The moisture.IQ enables users to assign tags to customize the display of the input parameters. The instrument accepts a
separate 9-character label for each input. To tag inputs, complete the following steps:
1. From the Configuration Menu screen, tap the
Channel
2. Tap the
Mode
3. Tap the
button and select either
drop-down list.
4. Tap the text bar to enter the tag for the selected
Save
then tap
to complete the process.
Note: To remove a tag, tap
66
Figure 59: Tag Setup
button and specify the channel for which the
Hygro, Pressure, Temperature, Oxygen, Aux 1
Clear All,
Save
then tap
Tagging
button to open the Tag Setup screen.
Tag
should be applied.
Channel and Mode
. Tap the
.
Aux 2
or
from the
Save
button after entering the text,
moisture.IQ User's Guide
Advertisement
Table of Contents
