Table of Contents
Advertisement
3.9 Module Setup
The Module Setup menu (see Figure 41 below) is primarily a read-only screen. It provides detailed information on the
currently installed sensor modules.
•
Serial Number
The
•
Below the data boxes, the
•
When an external USB drive containing a sensor module firmware update file is connected to the moisture.IQ,
Update Firmware
the
and then tap the
automatically.
•
After you have finished reading the information on this screen, tap the
Menu.
moisture.IQ User's Guide
Figure 41: The Module Setup Screen
Firmware Version
and the current
Module Letter
button is enabled. To update the sensor module firmware, tap the
Update Firmware
button. The module firmware will be updated and the system will reboot
for the installed modules are listed at the top of the screen.
Available Channels
and the
Chapter 3. Using the Settings Menu
for each sensor module are listed.
Module
Return
button to return to the Settings
to be updated
45
Advertisement
Table of Contents
