Chapter 3. Using the Settings Menu
Chapter 3. Using the Settings Menu
3.1 Introduction
After completing the installation of your moisture.IQ system (see Chapter 1) and powering up the system
(see Chapter 2), you must configure the moisture.IQ before reliable data can be collected.
The Settings menu is used to configure the display and to program the desired system settings. Use the menu map in
Figure 76 on page 107 and the display touch screen shown in Figure 32 below as guides while programming the
Settings
Settings menu. To begin, tap the
menu button on the main measurement display screen, and proceed to the
following sections for instructions.
Figure 32: Settings Menu Screen
Figure 33: Settings Menu Screen for Explosion-Proof and Weatherproof
moisture.IQ User's Guide
37