Changing An Address Book Destination - Kyocera Ecosys M812cidn Operation Manual

Preparation before Use > Adding a Destination
7
Use [+] / [-] or the numeric keys to enter an address number (000 to 250).
For auto assignment, enter 000.
NOTE
• An address number is an ID number for a single destination. You can select any available number for groups.
• If you specify an address number that is already in use, an error message will appear and the group will not
be registered.
8
Select [OK].
4
Check if the selected destination was added to the group > [Save]
Now the group is added to the Address Book.

Changing an Address Book Destination

Edit and delete the destinations (contacts) you added to the Address Book.
1
Display the screen.
1
[System Menu / Counter] key > [Address Book/One Touch] > [Address Book]
2
Make the changes you want.
NOTE
Destinations can be sorted or searched by destination name or address number.
Checking and Editing Destinations (2-4)
Editing a Contact
1
Select [ ] for the destination you want to edit.
2
Change "Name", "Address Number" and destination type and address.
For details on how to edit, refer to the information below.
Registering a contact address (3-32)
3
[Save] > [Yes]
Register the changed destination.
Editing a Group
1
Select [ ] for the destination you want to edit.
2
Change "Name" and "Address Number".
For details on how to edit, refer to the information below.
Adding a Group (3-35)
3
Select [Member].
4
To delete a destination from the group, select [
5
[Save] > [Yes]
Register the changed destination.
] > [Yes]. To add a destination, select [
3-36
].