Sleep Level (Energy Saver) (Models Except For Europe) - Kyocera Ecosys M812cidn Operation Manual

Installing and Setting up the Machine > Energy Saver function

Sleep Level (Energy Saver) (models except for Europe)

For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The
default setting is Energy Saver mode.
Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be
set separately for each function. The ID card cannot be recognized. To change the preset sleep time, refer to the
following:
NOTE
If the optional network interface kit is installed, Energy Saver cannot be specified.
To resume, select the [Energy Saver] key on the operation panel. If print data is received during Sleep, the machine
automatically wakes up and starts printing.
For more information on Sleep Level settings, refer to the following:
Quick Setup Wizard (2-25)
2-24