Kyocera Ecosys M812cidn Operation Manual page 380

System Menu > [Date/Timer/Energy Saver]
Item
Sleep Level (models except for
*1
Europe)
Sleep Rules
Sleep Timer
Energy Saver Recovery Level
Auto Error Clear
Error Clear Timer
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal
Sleep mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit is installed.
Select whether to use the Energy Saver mode for the following functions individually:
*2
• Card Reader
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, it does not wake
from sleep mode when it receives print data from a PC connected by USB cable. Also,
the ID card cannot be recognized.
Set amount of time before entering Sleep.
Value
ECOSYS M8124cidn for Europe: 1 to 60 minutes (1 minute increments)
ECOSYS M8130cidn for Europe: 1 to 60 minutes (1 minute increments)
Except for Europe 1 to 240 minutes (1 minute increments)
Select the method of recovery from energy saver.
Value
Full Recovery: This mode enables the use of all functions immediately.However, this
mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following: enabling
the use of all functions immediately or enabling the use of desired functions only.If you
want to use all functions immediately, select the [Energy Saver] key to execute recovery.
Power Saving Recovery: This mode enables the use of desired functions only. This
mode saves energy most effectively.
If an error occurs during processing, processing stops to wait for the next step to be
taken by the user. In the Auto Error Clear mode, automatically clear the error after a set
amount of time elapses.
Value: Off, On
NOTE
For setting the automatic error recovery time, refer to the following item.
If you select [On] for Auto Error Clear, set the amount of time to wait before
automatically clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
8-59
Description