Setting Processing When The Limit Is Exceeded; Editing An Account - Kyocera Ecosys M812cidn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting an account. [Local]

Setting Processing When the Limit is Exceeded

This specifies how the machine behaves when the counter has reached the limit of restriction.
Item
*1
Immediately
Subsequently
Alert Only
*1 The next job will be prohibited in sending or in storing in the box.
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
2
[Job Accounting Settings] > [Default Setting] > [Apply Limit]
2
Configure the settings.
1
Select [Immediately], [Subsequently], or [Alert Only].
2
Select [OK].

Editing an Account

1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
2
[Job Accounting Settings] > [Accounting List]
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the subsequent job will be rejected.
Job continues while displaying an alert message.
9-33
Description