Editing One Touch Key - Kyocera Ecosys M812cidn Operation Manual

Preparation before Use > Adding a Destination
2
Add a One Touch Key.
1
Selecting a One Touch Key number (001 to 100) > [
selection using direct entry of a One Touch Key number.
NOTE
For details on the [Quick No. Search] key, refer to the information below.
Using the [Quick No. Search] Key (3-13)
Select a One Touch Key with no registered destination.
System Menu/Counter.
Address Book/One Touch - One Touch Key
001 AAA 002 BBB
004 None 005 None
007 None 008 None
010 None 011 None
Menu
2
Select a destination (contact or group) to assign to the One Touch Key.
Selecting [ ] shows detailed information about the selected destination.
NOTE
Destinations can be sorted or searched by destination name or address number.
Checking and Editing Destinations (2-4)
3
Enter the name of the One Touch Key displayed on the send base screen > [Next >].
NOTE
The number of characters you can enter is limited.
Maximum number of characters: Up to 24
For details on entering characters, refer to the following:
Character Entry Method (12-11)
4
Select [Register].
The destination is registered to the One Touch Key.

Editing One Touch Key

Edit the destinations you added to One Touch Key.
1
Display the screen.
1
[System Menu / Counter] key > [Address Book/One Touch] > One Touch Key]
2
Select a One Touch Key number (001 to 100) to edit. For direct entry of a One Touch Key number, select the
[Quick No. Search] key.
2
Changing the Registered Information.
1
[Menu] > [Edit] > [Destination]
10:10
003 CCC
1
006 None
1/9
009 None
012 None
End
] and then selecting the [Quick No. Search] key enables
3-38