Table of Contents
Advertisement
Troubleshooting > Responding to Messages
Error Message
Removable memory
error.
Removable Memory
is full.
Remove originals in
the document
processor.
Replace all originals
and press
[Continue].
Replace MK.
Running security
function...
Checkpoints
Is writing to a removable
memory prohibited?
-
-
Are there any originals left in the
document processor?
-
-
-
Corrective Actions
An error occurred in the removable
memory. The job stopped. Select
[End].
The error cord is as follows.
01: Connect a removable memory
that can be written to.
An error occurred in the removable
memory. The job stopped. Select
[End].
The error cord is as follows.
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the
power OFF/ON. If the error still
occurs, the removable memory is
not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect
a compatible removable memory.
Job is canceled. Select [End].
Insufficient free space in the
removable memory. Delete
unnecessary files.
Remove originals from the
document processor.
Remove originals from the
document processor, put them
back in their original order, and
place them again. Select
[Continue] to resume printing.
Select [Cancel] to cancel the job.
Replacement of the parts in the
maintenance kit is necessary at
every 200,000 pages of printing
and requires professional
servicing. Contact your Service
Representative.
Running security function. Please
wait.
11-18
Reference
Page
-
7-10
-
11-41
-
-
-
Advertisement
Table of Contents
