Table of Contents
Advertisement
Installing and Setting up the Machine > Installing Software
3
Select [Express Install].
4
Install the software.
Select the model name of the machine. You can also select [Use host name for port name] and set to use the host
name of the standard TCP/IP port. (A USB connection cannot be used.)
When you click [Install], a screen asking for your cooperation with data collection will be displayed. Select one of
the answer choices and click [OK].
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name. Installation may fail if the
host name is specified.
NOTE
• The machine cannot be detected unless it is on. If the computer fails to detect the machine, verify that it is
connected to the computer via a network cable or a USB cable and that it is turned on and click.
• If the Windows security window appears, click [Install this driver software anyway].
• To install Status Monitor on versions of Windows prior to Windows 8, it is necessary to install Microsoft .NET
Framework 4.0 beforehand.
1
2
3
2-29
(Update).
Advertisement
Table of Contents
