[Printer] - Kyocera Ecosys M812cidn Operation Manual

System Menu > [Printer]

[Printer]

Menu Transition: [System Menu / Counter] key > [Printer]
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Item
Emulation
Alt Emulation
KPDL Error Report
Color Setting
EcoPrint
Override A4/Letter
Duplex
Copies
Orientation
Wide A4
Form Feed TimeOut
LF Action
Select the emulation for operating this machine by commands oriented to other types of
printers.
Value: PCL6, KPDL, KPDL (Auto)
NOTE
When you have selected [KPDL (Auto)], set "Alt Emulation", too.
When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error Report", too.
When you have selected [KPDL (Auto)] as emulation mode, you can switch between
KPDL and another emulation mode (alternative emulation) automatically according to
the data to print.
Value: PCL6
When an error has occurred during printing in KPDL emulation mode, set whether or not
the error report is output.
Value: Off, On
You can choose whether reports are printed in color or black and white.
Value: Color, Black & White
EcoPrint conserves toner when printing. This is recommended for test copies where
faded printing is not a problem.
Value: Off, On
Select whether to treat A4 size and Letter, which are similar in size, as the same size
when printing.
Value
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use whichever
size is in the paper source.
Select binding orientation for duplex mode.
Value: 1-sided, 2-sided Bind LongEdge, 2-sided Bind ShortEdge
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Set the default orientation, [Portrait] or [Landscape].
Value: Portrait, Landscape
Turn this to on to increase the maximum number of characters that can be printed in a
line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10
pitch). This setting is only effective in PCL6 emulation.
Value: Off, On
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed.
When the preset timeout passes, the machine automatically prints paper. The options
are between 5 and 495 seconds.
Value: 5 to 495 seconds (in 5 second increments)
Set the line feed action when the machine receives the line feed code (character code
0AH).
Value: LF Only, LF and CR, Ignore LF
8-31
Description