Table of Contents
Advertisement
Troubleshooting > Responding to Messages
B
Error Message
Box is not found.
Box limit exceeded.
C
Error Message
Cassette is not
installed.
Calibrating...
Cannot connect to
Authentication
Server.
Cannot connect.
Cannot duplex print
on the following
paper.
Cannot offset the
following paper.
Cannot print the
specified number of
copies.
Checkpoints
-
Is [End] displayed on the screen?
Checkpoints
-
-
-
-
-
-
-
Did you select a paper size/type that
cannot be duplex printed?
Did you select a paper size/type that
cannot be offset?
-
Corrective Actions
The specified box cannot be found.
Job is canceled. Select [End].
The specified box is full, and no
further storage is available; Job is
canceled. Select [End]. Try to
perform the job again after printing
or deleting data from the box.
Corrective Actions
Cannot feed paper. Set the
cassette indicated on the screen.
The machine is under the
adjustment to maintain its quality.
Please wait.
Set machine time to match the
server's time.
Check the domain name.
Check the host name.
Check the connection status with
the server.
This appears when the Wi-Fi or Wi-
Fi Direct connection did not
complete. Check the settings, and
check the signal conditions.
Select [Paper Selection] to select
the available paper. Select
[Continue] to print without using
Duplex function.
Select [Paper Selection] to select
the available paper. Select
[Continue] to print without using
Offset function.
Only one copy is available. Select
[Continue] to continue printing.
Select [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
- Uncheck [RAM Disk] in the
"Device Settings" tab of the
printer's properties.
NOTE
If you unchecked the [RAM Disk],
check the [RAM Disk] again after
the printing is completed. If not,
print speed may be reduced.
11-11
Reference
Page
-
-
Reference
Page
-
-
2-12
9-5
9-5
-
-
-
6-10
8-53
Advertisement
Table of Contents
