Table of Contents
Advertisement
Before Using the Fax Machine > Registering Destinations in the Address Book
Registering Destinations in the Address Book
Save frequently used destinations to the Address Book or One Touch Key. The saved destinations can be changed. The
destinations are available for Send as E-mail, Send to Folder, and Fax Transmission.
NOTE
Registering and editing of the Address Book can also be done in Embedded Web Server RX.
Machine's Operation Guide
Adding a Destination (Address Book)
Add a new destination to the Address Book. There are two registering methods, contacts and groups. When adding a
group, enter the group name and select group members from the Address Book.
NOTE
If user login administration is enabled, you can only edit destinations in the Address Book by logging in with
administrator privileges.
Adding a contact
A maximum of 200 contact addresses can be registered. Destination name, fax number, sub address communication,
encryption, transmission start speed, and ECM can be registered for each destination.
1
2
Display the screen.
[FAX] on the Home screen > [Address Book] > [Menu] > [Add] > [Contact]
Enter the destination name.
1
Enter the destination name to be displayed on the Address Book > [Next >]
NOTE
Up to 32 characters can be entered.
For details on character entry, refer to the following:
Character Entry Method (page 10-2)
2
To specify an Address Number, select [Address Number].
3
Use [+], [-] or numeric keys to enter a particular Address Number (001 to 250).
If you set "000" as the address number, the address is registered under the lowest
available number.
NOTE
Address Number is an ID for a destination. You can select any available number for
groups.
If you specify an address number that is already in use, an error message appears when
you select [Save] and the number cannot be registered.
4
Select [OK].
2-11
Advertisement
Table of Contents
Troubleshooting
