Table of Contents
Advertisement
System Menu > [System/Network]
Item
HTTP
Protocol Settings
Available Network
(Wi-Fi Direct)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
HTTPS
Protocol Settings
Available Network
(Wi-Fi Direct)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
IPP
Protocol Settings
Direct SMTP Port
Number
Available Network
(Wi-Fi Direct)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
―
Select whether to communicate using HTTP.
Value: Off, On
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
―
Select whether to communicate using HTTPS.
Value: Off, On
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
―
Selects whether to receive documents using IPP. To use the IPP protocol, set [IPP] to [On],
and set [SSL] to [Off]. In addition, select [Not Secure (IPP&IPPS)] for the security settings
from Command Center RX.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is
the self-certificate of the machine.
Specifies the port number used. The default port number is 631.
Value: 1 to 32767
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
8-44
Description
*1
*1*2
*1
Advertisement
Table of Contents
