Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
3
Click [OK].
Local Authorization Settings
Select whether or not to use Local Authorization.
NOTE
When using Local Authorization, the user authentication type must be set to [Local Authentication].
Enabling User Login Administration (9-5)
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
2
[User Login Settings] > [Local User Authorization]
2
Configure the settings.
Select [Off] or [On].
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE
To use the group authorization settings, [Network Authentication] must be selected for the authentication
method in "User Login Settings". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (9-5)
LDAP (8-43)
Group Authorization
Use the group authorization.
9-17
Advertisement
Table of Contents
