Table of Contents
Advertisement
User Guide: PTP 800 Licensed Ethernet Microwave
Figure 7-2 Recovery Options page
Table 7-11 Recovery options
Upgrade Software
Image
Management Mode
After Reset IP
Reset IP & Ethernet
Configuration back to
factory defaults
Erase Configuration
Zeroize Critical
Security Parameters
Reboot
phn-1478_005v000
Apr 2010
Option
Upgrading the software image
This option selects the management mode that will be
configured following reset of the IP and Ethernet
configuration, or following erasure of all
configuration data.
Resetting IP and Ethernet configuration to factory
defaults
Erasing configuration
Zeroizing security parameters
This option is used to reboot the CMU after resetting
configuration or parameters, as described in the
above recovery tasks.
Recovery task
on page 7-17.
on page 7-18.
Recovering the CMU
on page 7-16.
on page 7-19.
7-15
Advertisement
Table of Contents
