Setting The Real-Time Clock; Figure 6-25 Clock Section Of Remote Management Page (Sntp Disabled) - Motorola PTP 800 User Manual

Managing faults

Setting the real-time clock

Perform this task to set the real-time clock of the CMU.
The clock supplies accurate date and time information to the CMU. It can be set to
run with or without a connection to a network time server (SNTP):
x
In the absence of an SNTP server connection, the clock can be set to run
manually. The clock is battery backed and will continue to operate for several
days after the CMU is switched off.
x
If an SNTP server connection is available, the clock can be set to synchronize
with the server time at regular intervals.
Setting the real-time clock manually
To set the CMU clock to keep time without connecting to a networked time server,
proceed as follows:
Procedure 6-26 Set the real-time clock manually
From the left hand menu, select Remote Management. The Remote
1
Management page is displayed
2 In the Clock section of the page, set the SNTP State attribute to Disabled.
The manual clock attributes are displayed
3 Review and update the manual clock attributes
4 Select Submit Updated Configuration.

Figure 6-25 Clock section of Remote Management page (SNTP disabled)

6-52
(Figure 6-22).
(Figure 6-25).
(Table
Chapter 6 Operation
6-19).
phn-1478_005v000
Apr 2010