Table 5-7 Step 2: Radio License Configuration Attributes - Motorola PTP 800 User Manual

User Guide: PTP 800 Licensed Ethernet Microwave

Table 5-7 Step 2: Radio License Configuration attributes

Attribute
Radio License
Identifier
Radio License Band
Radio License Region
Radio License
Bandwidth
Radio License Channel
Separation
Radio License
Modulation Selection
Radio License Mod
Mode
Radio License Ref.
Modulation
Radio License Max
Mod Mode
Radio License Min
Mod Mode
Radio License Max
EIRP
Radio License Tx
Frequency
phn-1478_005v000
Apr 2010
Enter an identifier for the radio license, for example a
certificate number, if one was provided by the licensing
authority.
This attribute is for reference only.
Select the licensed band (GHz). When an ODU is
attached, this attribute is set automatically.
Select the license region.
Select the licensed bandwidth (MHz).
This attribute is only displayed when Radio License
Region is set to FCC or Canada.
Select the licensed spacing between channels (MHz).
This attribute is only displayed when Radio License
Region is set to ETSI or Brazil.
'Fixed Modulation' is the default.
'Adaptive Modulation' may be available, if permitted by
the license.
Select the licensed modulation mode.
This attribute is only displayed when Radio
License Modulation Selection is set to 'Fixed
Modulation'.
Reference modulation mode specified by the license.
This control is only visible for certain regions when
Radio License Modulation Selection is set to 'Adaptive'.
Select the lowest modulation mode allowed by the
license. This control is only visible for certain regions
when Radio License Modulation Selection is set
to 'Adaptive'.
Select the highest modulation mode allowed by the
license. This control is only visible for certain regions
when Radio License Modulation Selection is set
to 'Adaptive'.
Enter the maximum permitted strength of the radio
signal in dBm EIRP.
Enter the licensed transmit frequency (MHz).
Installation wizard
Meaning
5-97