Table of Contents
Advertisement
Remote mounting of antenna and ODU
Attach antenna and waveguide to pole
To mount the antenna on the pole and attach it to the ODU via the flexible
waveguide, proceed as follows:
Procedure 5-8 Remote mount - attach antenna and waveguide to pole
1
Follow the antenna manufacturer's instructions to attach the antenna
to its bracket and to the mast or pole.
2
Check that the waveguide, antenna and remote mount kit have
compatible interfaces. Check that the mating surfaces are clean and
free from damage.
Fit one of the 'O' ring seals supplied with the waveguide kit to the
3
flexible waveguide flange that has the O ring groove.
4
Using the waveguide flange fitted with the 'O' ring, fit the flexible
waveguide to the remote mount. Ensure that the waveguide cavity
orientation matches the opening in the remote mount kit. Fit four
shorter screws, using a spring washer and a plain washer on each
screw. It is sometimes more convenient to complete this operation
before the assembly is fitted to the mast, connecting the flexible
waveguide to the antenna when fitting the remote mount to the mast.
5-46
Chapter 5 Installation
phn-1478_005v000
Apr 2010
Advertisement
Table of Contents
