Table 6-16 Remote Management Page Snmp Attributes - Motorola PTP 800 User Manual

Managing faults

Table 6-16 Remote Management page SNMP attributes

Attribute
SNMP State
SNMP Enabled Traps
SNMP Trap Version
SNMP Trap IP Address
SNMP Trap Port
Number
SNMP Community
String
SNMP Port Number
6-46
'Disabled' means that SNMP traps are not generated.
'Enabled' means that SNMP traps will be generated in
response to selected events, and sent to the network
management system.
Select the events that will generate SNMP traps.
Select the SNMP protocol version to be used for SNMP
traps.
Enter the IP address that will receive all SNMP traps.
This will normally be the network management system,
but it may be a separate trap receiver.
To disable trap generation, enter 0.0.0.0 in the IP
Address.
Enter the port number of either the networked SNMP
manager or trap receiver. By convention, the default port
number is 162.
The SNMP community string acts like a password
between the network management system and the
distributed SNMP clients (PTP 800 CMUs). Only if the
community string is configured correctly on all SNMP
entities can the flow of management information take
place. By convention the default value is set to 'public'.
Enter the port that the SNMP agent is listening to for
commands from a management system. By convention,
the default port number is 161.
Chapter 6 Operation
Meaning
phn-1478_005v000
Apr 2010