Motorola PTP 800 User Manual page 323

User Guide: PTP 800 Licensed Ethernet Microwave
Restoring the configuration file
Perform this task to restore the operational configuration of the unit.
Before starting this task, ensure that:
x
The configuration file of the old (faulty) unit has been saved.
x
The new (replacement) unit has been installed.
x
The license key of the old unit has been entered in the new unit.
To restore the configuration file, proceed as follows:
Procedure 6-14 Restore configuration file
From the left hand menu, select Configuration, Save And Restore. The
1
Save & Restore Configuration page is displayed
Select Browse and navigate to the PC folder containing the saved
2
configuration file (.cfg).
Select Restore Configuration File and Reboot.
3
Select OK to confirm the restore.
4
The configuration file is uploaded and used to reconfigure the new unit to
the same state as the old unit. On completion, the unit reboots.
phn-1478_005v000
Apr 2010
Upgrading the PTP 800
(Figure 6-15).
6-33