User Guide: PTP 800 Licensed Ethernet Microwave
Step 2: Configuring radio license parameters
Perform this task to enter the radio license parameters. These parameters are
normally obtained from the individual license.
To configure radio license parameters, proceed as follows:
Procedure 5-20 Configure radio license parameters
The Step 2: Radio License Configuration page is displayed
1
Figure 5-31
Enter the radio license attributes
2
Select Next.
3
Figure 5-30 Step 2: Radio License Configuration page (fixed modulation)
phn-1478_005v000
Apr 2010
or
Figure
5-32).
(Table
5-7).
Installation wizard
(Figure 5-30
or
5-95