Table of Contents
Advertisement
Important safety information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This section describes important safety guidelines that must be observed by
personnel installing or operating PTP 800 equipment.
WARNING
Power lines
Exercise extreme care when installing antennas near power lines.
Working at heights
Exercise extreme care when working at heights.
Grounding and protective earth
The outdoor unit (ODU) and compact modem unit (CMU) for the PTP 800 must be
properly grounded. It is the user's responsibility to install the equipment in
accordance with national regulations. In the USA, follow Section 810 of the
National Electric Code, ANSI/NFPA No.70-1984
54 of the
procedures for grounding the ODU, CMU, mast, lead-in wire and discharge unit,
size of grounding conductors and connection requirements for grounding
electrodes. Other regulations may apply in different countries and therefore it is
recommended that installation of the outdoor unit be contracted to a professional
installer.
The PTP 800 ODU and CMU must be grounded to a protective earth in accordance
with the Local Electrical Regulations.
phn-1478_005v000
Apr 2010
To prevent loss of life or physical injury, observe the safety
guidelines in this section.
Canadian Electrical Code
(USA). In Canada, follow Section
. These codes describe correct installation
Safety
. .
.
.
.
.
i
Advertisement
Table of Contents
