Table of Contents
Advertisement
Electromagnetic compliance
Compliance testing
Changes or modifications not expressly approved by Motorola could void the user's
authority to operate the system.
This system has achieved Type Approval in various countries around the world.
This means that the system has been tested against various local technical
regulations and found to comply.
Safety testing
The PTP 800 system has been tested for compliance with IEC 60950-1:2005 Edition
2.0 and IEC 60950-1:2001 Edition 1.0, with deviations applicable for Australia and
New Zealand.
ETSI compliance testing
The PTP 800 system has been tested for compliance to harmonized European
standard
where frequency coordination is applied
Article 3.2 of the R&TTE directive.
It has also been tested for compliance to the electro-magnetic compatibility
standards
and conducted radiations of Class A have been applied. The equipment meets Class
B, except when the optional AC to DC converter is included in the system, where it
meets Class A.
Compliance to the requirements of the R&TTE directive has been confirmed by a
Notified Body.
Canada compliance
The PTP 800 system has been tested for compliance to RSS-GEN and the band
specific Technical Requirements documents in the SRSP series. The test results
have been scrutinized by a TCB who have issued a Certificate of Conformity.
4-64
EN 302 217.2.2 V1.3.1 Digital systems operating in frequency bands
EN 301 489-1 V1.8.1
. This covers the essential requirements of
EN 301 489-4 V1.4.1
and
Chapter 4 Reference information
. The limits for radiated
phn-1478_005v000
Apr 2010
Advertisement
Table of Contents
