Inventory and tools
Tools required
The tools required for installing PTP 800 equipment are listed in
Table 5-4 Tools required for PTP 800 installation
Equipment to be Installed
CMU
Direct Mount ODU
Remote Mount
Flexible Wave Guide
Flexible Wave Guide hanger
Coupler
Antenna
Cable
5-12
Tools Required
Pozi screw driver (PZ1)
Ground lug crimp tool (diameter 5mm)
8mm spanner
Lubricant (supplied)
17mm spanner
Lubricant (supplied)
Allen key (supplied in the kit)
13mm spanner
5mm Allen key
Flat bladed screw driver (6mm) or
Pozi screw driver (PZ2)
6mm Allen key
2.5mm and 3mm Allen keys (supplied)
Lubricant (supplied)
17mm spanner
7 mm spanner (for tapered transition)
Voltmeter and BNC lead
Compass and GPS meter
Cable cutters
Flat file to dress the cable inner core
Wire brush to comb the braid
Crimp tool Motorola part 66010063001
Torque wrench
Chapter 5 Installation
Table
5-4.
phn-1478_005v000
Apr 2010