Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual page 140

Toe Link
Attach the Toe link arm to the spindle using the M14 x 80mm bolt and locknut.
Repeat for the right hand side.
Use the torque specifications page at the back of the instructions to torque the control arm to spindle bolts.
Coil-Over Shock Assembly

Snap ring pliers, ¾" wrench, ¾" socket, Ratchet, floor jack

Shock set, Insulated clip hardware.

The shocks are pre-valved at the factory in compression and rebound for good street use. The shocks can
be adjusted in rebound as per Koni's instructions if so desired.

The Roadster/Coupe IRS springs are 400lb. Other springs are available for different ride characteristics.

WARNING! Incorrect assembly and maintenance of this part can cause serious injury or death.

If using the silver double adjustable shocks, these must be mounted with the body of the shock down.
139
www.factoryfive.com 508-291-3443