Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual page 144

Jack the spindle up so the body end of the shocks can be mounted on the shock mount on the control arm using
the longer 1.09" spacer on the back and
Torque the lower shock bolt to 54Nm (40 ft-lb).
Remove the floor jack.
Driveshaft adapter

There are two different Driveshaft adapters, one for center sections from automatic cars which is coated
clear zinc. The Driveshaft adapter for center sections from manual cars is coated yellow zinc.

Driveshaft adapter, fasteners

8mm hex socket, torque wrench, Loctite.
Apply the emergency brake.
" spacer in front of the shock.
7
/
16
143
www.factoryfive.com 508-291-3443