Table of Contents
Advertisement
Push and twist the ball stud retainer onto the end of the cable and attach the ball stud retainer using a
key.
Attach the engine end of the cable sheath to the cable mount on the engine using ⅜" and
the cable wiper onto the remaining threads.
Cable adjustment
Check the full range of the accelerator pedal travel to ensure that there are no interferences with the pedal or
travel. Also remove the air cleaner and ensure you are getting full travel in both the open and closed directions.
After driving the car for the first time you may want to adjust the pedal location for optimum heal/toe and shoe
size differences.
Brake System
3
Tube bender,
tape measure, razor knife, brake fluid, channellock pliers.
Pedal Components, Insulated clip hardware, Brake line components,
assembly
", ¼", ½" drill bits, drill,
/
16
www.factoryfive.com
",
" wrenches, 7mm socket, ratchet, rivet gun, marker,
7
11
/
/
16
16
221
508-291-3443
" wrenches and push
7
/
16
" brake lines, Front caliper/rotor
3
/
16
" hex
5
/
64
Advertisement
Table of Contents
