Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual page 79

Bolt the steering arms to the spindles so the tie rod end will mount from the bottom (the taper on the hole will
open out toward the bottom) and the kink in the arm angles the arm outward toward the rotor. Torque to 60 ft-
lbs.
The hub is a snug fit on the spindle and may require a light tap with a soft mallet to get in place. Torque the
hub nut to 305-338Nm (225-250 ft-lbs).
78
www.factoryfive.com 508-291-3443