Solid Axle Rear Suspension
Skip to the Independent Rear suspension if not installing a Solid axle.
Solid Axle Preparation
¾" sockets, ¾" wrench, ½" drill bit, drill, floor jack, jack stands, Torque Wrench
8.8" Rear axle assembly, Box 11 Solid axle Traction Lok brackets, Rear control arms.
Use caution when working with the rear end assembly, it weighs 225 lbs.
Two bolts for the lower control arms are included in the kit with the Traction Lok Brackets. The other
two bolts are included with the optional control arms.
If not on the axle, attach the desired rear brakes to the axle.
Check out the Appendix for the optional FFR brake install or
brake options.
92
www.factoryfive.com
508-291-3443
www.factoryfiveparts.com
for Wilwood