Speedometer Sending Unit - Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual

Cut the mustang plug in half using a pair of wire cutters or remove the female connectors from the housing and
connect to the correct terminals on the switch.

Speedometer Sending Unit


11mm deep socket, ratchet, wire crimping tool

Speedometer sending unit components, misc. electrical components

The sending unit electrical connection is only needed if the Speedometer is not GPS controlled. The
sending unit does still need to get installed though to prevent a transmission fluid leak.
Unpack the speedometer sending unit components (complete kit).
281
www.factoryfive.com 508-291-3443