Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual page 188

Bolt the pedal to the mount plate using the ¼"x ¾" screws and locknuts.
Rotate the pedal so the top of the pedal where the accelerator cable will attach is 1.50" away from the front of
the footbox and mark the front of the footbox directly in front of the ball stud.
" hole at the point marked on the footbox.
5
Drill a /
16

If running a 4.6L engine, do not do the next step.
187
www.factoryfive.com 508-291-3443