Upper Steering Shaft - Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual

Loosely mount the top pillow block to the chassis underside of the chassis mount with the set screw toward the
rear of the car using the 60103 spacers, the
½" wrench. Do not tighten the locknut all the way until all of the steering parts have been installed.

Upper Steering Shaft

 ", ", " hex keys, ½" wrench, rubber mallet
5 3 5
/ / /
32 16 16

Steering system hardware

Use thread locker on all the steering shaft screws that do not have jam nuts and the adapter screws.
Unpack the upper steering shaft from the primary chassis components box.
" x 1.25" stainless button head screws, locknuts,
5
/
16
214
www.factoryfive.com 508-291-3443
" hex key and
3
/
16