Table of Contents
Advertisement
Once the car has been aligned, use a 1
Loctite on the threads where the jam nut will sit.
Retighten the jam nut.
Optional IRS Brakes
Download the 2015 IRS brake instructions from
brakes.
Connect the brake hose to the brake caliper.
Torque the banjo bolt to 39 Nm (29 ft-lb).
Run the brake hose over to the frame while the suspension is in droop and keep the brake line slack to locate the
frame mount.
Run the hard brake lines in the kit to the brake line mount.
The e-brake cables are mounted later with the e-brake handle
Fuel System
Insulated clip hardware, Fuel line components, ¼",
The pictures show the install of the complete kit fuel system, the OEM set-up is similar.
Frame prep
Secondary body fasteners, fuel tank straps, fuel strap fasteners
" wrench to loosen the upper control arm large jam nut and put some
5
/
8
www.factoryfiveparts.com/instructions
5
146
www.factoryfive.com
" fuel lines, OEM fuel tank components.
/
16
508-291-3443
and install the
Advertisement
Table of Contents
