Factory Five Racing Gen 3 Type 65 Coupe Owner's Manual page 182

Put one the ¾" master cylinder onto the brake left master cylinder mount location and turn the threaded shaft
into the threaded mount on the brake pedal. As a starting point, thread the shaft in until you can see it is flush
on the other side of the mount.
" master cylinder in the right master cylinder mount location.
5
Repeat this for the /
8

The brake pedal master cylinder pushrod mounts are different from each other. Only one has a screw
and nut. This is normal.
181
www.factoryfive.com 508-291-3443