Checking The Configuration; Configuring The Storm Control Function; Establishing The Configuration Task - Huawei Quidway S3700 Series Configuration Manual

Hide thumbs Also See for Quidway S3700 Series:
Table of Contents

Advertisement

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Step 3 Run:
icmp rate-limit { total | interface interface-type interface-number [ to interface-
number ] } threshold threshold-value
The rate threshold of ICMP packets is set on an interface.
By default, the rate thresholds of ICMP packets is 100pps on an interface or globally.
----End

9.3.5 Checking the Configuration

Prerequisite
The configurations of traffic suppression are complete.
Procedure
l
----End
Example
Run the display flow-suppression interface interface-type interface-number command, and
you can view the configuration of traffic suppression on a specified interface.
<Quidway> display flow-suppression interface gigabitethernet 0/0/1
storm type
-------------------------------------------------------------------------------
unknown-unicast
multicast
broadcast
-------------------------------------------------------------------------------

9.4 Configuring the Storm Control Function

This section describes how to configure the storm control function.

9.4.1 Establishing the Configuration Task

This section describes how to establish the configuration task of the storm control function.
Applicable Environment
When receiving unknown unicast packets, multicast packets, or broadcast packets, the S3700
forwards the packets to all the interfaces except the receive interface because the S3700 cannot
determine the outbound interface according to the destination MAC address of packets. In this
case, storms may occur on the network. The forwarding performance of the S3700 is thus
reduced. The storms need to be controlled so that the S3700 can still forward packets in unicast
mode when traffic bursts.
Issue 01 (2011-07-15)
Run the display flow-suppression interface interface-type interface-number command to
check the configuration of traffic suppression.
rate mode
percent
percent
percent
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
set rate value
percent: 80%
percent: 80%
percent: 80%
9 Traffic Suppression Configuration
217

Advertisement

Table of Contents
loading

Table of Contents