Clearing Statistics About Mac Address Authentication; Configuration Examples; Example For Configuring Web Authentication - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Context
Statistics cannot be restored after being cleared. Therefore, confirm the action before you run
the following commands.
After you confirm to reset the statistics, do as follows in user view.
Procedure
l
----End

2.6.2 Clearing Statistics About MAC Address Authentication

Context
Statistics cannot be restored after being cleared. Therefore, confirm the action before you run
the following commands.
After you confirm to reset the statistics, do as follows in user view.
Procedure
l
----End

2.7 Configuration Examples

This section provides several configuration examples of NAC.

2.7.1 Example for Configuring Web Authentication

Networking Requirements
As shown in
l
l
Issue 01 (2011-07-15)
CAUTION
Run the reset dot1x statistics [ interface { interface-type interface-number1 [ to interface-
number2 ] } ] command to clear the statistics about 802.1x authentication.
CAUTION
Run the reset mac-authen statistics [ interface { interface-type interface-number1 [ to
interface-number2 ] } ] command to clear the statistics about MAC address authentication.
Figure 2-2, the requirements are as follows:
The user interacts with the Web authentication server through the Switch.
The authentication is performed by the RADIUS server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NAC Configuration
75