Configuring The Web Authentication Server - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Pre-configuration Tasks
Web authentication is only an implementation scheme to authenticate the user identity. To
complete the user identity authentication, you need to select the RADIUS or local authentication
method. Before configuring Web authentication, complete the following tasks:
l
l
l
Data Preparation
To configure Web authentication, you need the following data.
No.
1
2
3

2.3.2 Configuring the Web Authentication Server

Context
To perform Web authentication for users, configure a Web authentication server.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
web-auth-server server-name
A Web authentication server is configured and the Web authentication server view is displayed.
Up to eight Web authentication servers can be configured.
Step 3 Run:
server-ip ip-address
An IP address is assigned to the Web authentication server.
A Web authentication server can have four IP addresses.
Step 4 Run:
url url-string
Issue 01 (2011-07-15)
Configuring the Internet Service Provider (ISP) authentication domain and AAA schemes,
that is, RADIUS or local authentication schemes, for the user
Configuring the user name and password on the RADIUS server if RADIUS authentication
is used
Adding the user name and password manually on the S3700 if local authentication is used
Data
Name, IP address, and URL of the Web Server
Version number and interface number of the Portal protocol
Authentication-free rule ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NAC Configuration
51