Configuration Examples; Example For Configuring Mff - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
--------------------------------------------------------------------
User IP
--------------------------------------------------------------------
192.168.1.10
192.168.1.11
192.168.1.12
--------------------------------------------------------------------
[Vlan 100] MFF host total count = 3

8.4 Configuration Examples

This section provides a configuration example of MFF.

8.4.1 Example for Configuring MFF

Networking Requirements
As shown in
the devices are located in VLAN 10. To implement Layer 2 isolation and Layer 3 interconnection
between the hosts, you need to configure the MFF function on Switch A and Switch B.
Figure 8-1 Networking diagram for configuring MFF
Configuration Roadmap
The configuration roadmap is as follows:
1.
Issue 01 (2011-07-15)
192.168.1.3
User MAC
00-01-00-01-00-01
00-01-00-01-00-02
00-01-00-01-00-03
Figure 8-1, all the user hosts obtain IP addresses through the DHCP server and all
SwitchC
GE0/0/1
GE0/0/3
SwitchB
GE0/0/2
GE0/0/1
SwitchA
GE0/0/2 GE0/0/4
GE0/0/3
Configure DHCP snooping.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Gateway IP
192.168.1.254
192.168.1.254
192.168.1.252
DHCP server
10.10.10.1/24
8 MFF Configuration
Gateway MAC
00-02-00-02-00-01
00-02-00-02-00-01
00-02-00-02-00-03
209