Setting The Maximum Rate Of Sending Dhcp Messages - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
l
----End

3.7.3 Setting the Maximum Rate of Sending DHCP Messages

You can set the maximum rate of sending DHCP messages globally, in a VLAN, or on an
interface. If the maximum rate of sending DHCP messages is set globally, in a VLAN, and on
an interface simultaneously, the maximum rate of sending DHCP messages takes effect on an
interface, in a VLAN, and globally in descending order.
Procedure
l
Issue 01 (2011-07-15)
DHCP snooping is enabled in a VLAN.
6. Run:
quit
Return to the system view.
7. (Optional) Run:
interface interface-type interface-number
The interface view is displayed.
8. (Optional) Run:
dhcp snooping disable
DHCP snooping is disabled on the specified interface in the VLAN.
To disable DHCP snooping on a specified interface in a VLAN, perform steps 6 and
7.
Enabling DHCP snooping in the interface view
1. Run:
system-view
The system view is displayed.
2. Run:
dhcp enable
DHCP is enabled globally.
3. Run:
dhcp snooping enable
DHCP snooping is enabled globally.
4. Run:
interface interface-type interface-number
The interface view is displayed.
5. Run: dhcp snooping enableDHCP snooping is enabled on an interface.
Setting the maximum rate of sending DHCP messages in the system view
1. Run:
system-view
The system view is displayed.
2. Run:
dhcp snooping check dhcp-rate enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 DHCP Snooping Configuration
111