Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
l
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server nas-port-format { new | old }
The format of NAS port used by the RADIUS server is specified.
By default, the new format of NAS port is used.
Step 4 Run:
radius-server nas-port-id-format { new | old }
The format of the NAS port ID used by the RADIUS server is specified.
By default, the new format of the NAS port ID is used.
----End

1.4.11 Checking the Configuration

Prerequisite
The configurations of the RADIUS server template are complete.
Procedure
l
l
l
----End
Issue 01 (2011-07-15)
NAS port format: slot number (4 bits) + subslot number (2 bits) + port number (2 bits) +
VPI (8 bits) + VCI (16 bits).
NAS port ID
– New format of NAS port ID: slot=xx; subslot=x; VPI=xxx; VCI=xxxxx, in which
slot ranges from 0 to 15, subslot ranges from 0 to 9, port 0 to 9, VPI 0 to 255, and
VCI 0 to 65535.
– Old format of NAS port ID: slot number (2 characters) + subslot number (2 bytes) +
card number (3 bytes) + VPI (8 characters) + VCI (16 characters). The fields are prefixed
with 0s if they contain less bytes than specified.
Run the display radius-server configuration [ template template-name ] command to
check the configuration of the RADIUS server template.
Run the display_radius-attribute [ template template-name ] disable command to view
the disabled RADIUS attributes.
Run the display_radius-attribute [ template template-name ] translate command to
check the RADIUS attribute translation configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
16