Huawei Quidway S3700 Series Configuration Manual page 53

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Figure 1-1 Networking diagram of RADIUS authentication and accounting
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure a RADIUS server template.
Issue 01 (2011-07-15)
Domain Huawei
SwitchA
Configure a RADIUS server template.
Configure the authentication and accounting schemes.
Apply the RADIUS server template, the authentication and accounting schemes to the
domain.
Name of the domain that a user belongs to
Name of the RADIUS server template
Name of the authentication scheme, authentication mode, name of the accounting scheme,
and accounting mode
IP addresses, authentication and accounting port numbers of the primary and secondary
RADIUS servers
Key and retransmission times of the RADIUS server
NOTE
The following configurations are performed on Switch B.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
SwitchB
Network
Destination
Network
129.7.66.66/24
129.7.66.67/24
40