Optional) Configuring The Domain Name Delimiter; Checking The Configuration - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
domain domain-name
The domain view is displayed.
Step 4 Run:
state { active | block }
The status of the domain is set.
When a domain is in blocking state, users that belong to this domain cannot log in. By default,
the domain is in active state after being created.
----End

1.7.8 (Optional) Configuring the Domain Name Delimiter

Context
A user account on the S3700 consists of a user name and a domain name. The user name and
domain name are separated by the domain name delimiter. For example, if the defined domain
name delimiter is @, the user account of user1 in domain dom1 is user1@dom1.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
aaa
The AAA view is displayed.
Step 3 Run:
domain-name-delimiter delimiter
The domain name delimiter is configured.
delimiter can be set to anyone of \, /, :, <, >, |, @, ', and %.
By default, the domain name delimiter is @.
----End

1.7.9 Checking the Configuration

Prerequisite
The configurations of the domain are complete.
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
32